How to Program Blackweb Universal Remote With or Without Code

Is it possible to program Blackweb universal remote without code? The answer is Yes. Usually, you will program the Blackweb universal remote using codes given in the user manual. If you have lost the user manual, you can use these steps to program your universal remote to Samsung TV or any device without a code. With a Blackweb universal remote, you control any smart TVs, satellite or cable receivers, Blu-Ray or DVD players, audio devices, and more.

How to Program Blackweb Universal Remote Without Code

[1] Turn on your TV or device to which you want to program the remote.

[2] Press and hold the Device (TV/CBL/DVD/OK/SEL) button on the remote for 3-5 seconds. Release the button when you see the LED light on the corresponding key.

[3] Aim the remote at your device and keep hold of the CH+ and CH- buttons. You can see on/off signals in the remote.

[4] Following that, press and hold the Up and Down directional buttons until the device is turned off.

[5] It will perform an auto-search to find the exact remote code for your device.

[6] Once the TV is turned off, you can verify the code by pressing the Power button.

[7] If it turns on your device, press the Device button to save the code.

The LED light on the remote will blink twice if the code has been saved.

Note: In a similar way, you can program Vivitar universal remote without code when you don’t have remote codes.

How to Program a Blackweb Universal Remote Without Codes Using Auto Code Entry

[1] Press the Program button on the remote once you turn on your device.

[2] Press the TV button on the remote and keep hold of it until the Power LED starts to flash.

[3] Next, press and release the TV button, and the Power LED will flash once.

[4] Press and hold the OK button on the remote to send different codes to the TV.

[5] If the TV gets turned off, you can release the OK button.

Within a few seconds, the remote will store the code by itself. Now, you can start controlling the TV with a universal remote.

Note: Auto Code Entry also helps to program a universal remote to Westinghouse TV without Westinghouse remote codes.

How to Program a Blackweb Universal Remote With Code

[1] Aim the remote at the device, press the SETUP/PROGRAM button, and hold it until the LED stays idle.

[2] Press the Device button to which you want to program the remote.

[3] Enter the 4-digit code by referring to Blackweb Universal Remote Codes.

[4] If the entered code is found valid, the Power button light will turn off.

Tip: If the LED light stays on, it means that you have entered the wrong code.

[5] Finally, press the remote keys one by one to test the remote control. If some buttons do not work, repeat the steps with a different remote code.

FAQ