Blaupunkt TV Remote Codes With Programming Instructions

If the Blaupunkt TV remote is not working or is lost, you may find it hard to buy an original remote. I recommend users purchase a universal remote. For that, you must know the remote codes to program a universal remote to the Blaupunkt TV. Since I work in a consumer electronics shop, I have a user manual for One For All, Philips, and Spectrum universal remotes, including remote codes. So, I prepared an article for Blaupunkt TV users who need remote programming assistance.

In this article, you will get the remote codes for Blaupunkt TV with instructions to program a universal remote control.

List of Universal Remote Codes for Blaupunkt TV

Here is a list of 3,4, and 5-digit remote codes to set up a universal remote to the TV.

4 Digit Codes for One For All Universal Remote

3810	1709	2426	2106	0036	4843
0195	4142	3611	3362	0455	0170
0535	3465	0191	0554	0327

Philips Remote Codes for Blaupunkt TV

If you have a Philips universal remote, you can use these codes to program it to a Blaupunkt TV.

3 Digit Codes

218	234	222
240	354	227

4 Digit Codes

0218	0222	0581
0482	0240	0197

5 Digit Codes

19930	13865	11843	19617	15618
12713	12615	12318	12419	12517
12811	12919	13017

Spectrum Remote Codes for Blaupunkt TV

0011	0551	0291
0401	0881	0331

Note: You can also program a Spectrum remote to a TV without remote codes using the RF pairing method.

How to Program a Blaupunkt TV Remote

If you have purchased a Blaupunkt TV replacement remote, use these steps to program a remote.

[1] Turn on the TV and press the Google Assistant button on the remote control.

[2] The LED indicator on the remote will illuminate, and the TV screen will show the pairing process.

[3] Press and hold the Left and Home buttons simultaneously until you see the LED on the remote start to flash.

[4] Next, select the detected remote control on the screen and press the OK button.

[5] The pairing process will begin, and once done, the pairing screen will disappear.

That’s it. The Blaupunkt TV remote has been linked to your TV and is ready to use.

Note: If the remote programming fails, you can reset the Blaupunkt TV without a remote and try again.

How to Program a Universal Remote to Blaupunkt TV With Code

[1] Switch on the Blaupunkt TV by pressing the physical Power button.

[2] Hit the SETUP key on your universal remote and hold it until the LED blinks once and then twice.

[3] Press the TV key on the universal remote.

[4] Enter the remote code. If the code is accepted, the indicator light will flash twice.

[5] Test the remote functions by pressing the buttons on the universal remote.

How to Program a Universal Remote to Blaupunkt TV Without Codes

[1] Turn on your Blaupunkt TV. Hit the Device key on your universal remote and hold it for 5 seconds.

[2] Point the remote at the TV and press the CH+ and CH- buttons, and you can see on/off signals.

[3] Next, press the Up and Down buttons repeatedly until the device gets turned off.

[4] If the Blaupunkt TV has turned off, press the Power button to switch it on.

[5] If it turns on the TV, press the Device button to save the code.

[6] Now, the Device indicator light will blink twice to indicate that it has saved the code.

That’s it. You can start controlling your Blaupunkt TV with this universal remote.

FAQ