Haier TV Universal Remote Codes With Programming Instructions

At times, there is a possibility for Haier TV remote to stop working due to diverse reasons, Therefore, you can have a universal remote as the best replacement. But you can’t use the universal remote readily because it requires programming. Accordingly, we have listed the corresponding remote codes required to program a universal remote to your Haier TV.

List of Universal Remote Codes for Haier TV

Here is a list of 3, 4, and 5 digit remote codes that you can use to program a universal remote to your TV.

3 Digit Codes

505	506	515	640
844	718	081	216
512	523	498	500

4 Digit Codes

0094	0123	0810	0217
0157	0081	0216

5 Digit Codes

11748	11753	13382	13204	14398
11570	12293	12309	11749

GE Universal Remote Codes for Haier TV

081	216	217	0081	0216
0217	0157	1147	5409	5380
5307	5139	5120	5078	0935
5432	0671	0861	5321	0921
1741	2141	1161	3831	6141
6151	4851

Note: You can refer to the above-mentioned codes to program a GE universal remote to a Haier TV.

RCA Universal Remote Codes for Haier TV

1034	1749	2293	1570	2309
4398	3382	1748	11748	11753
13382	13204	14398	11570	12293
12309	11749

Philips Remote Codes for Haier TV

0223

0317

0323

0709

One For All Universal Remote Codes for Haier TV

0081

0217

0157

0216

Note: You can make use of these 4-digit remote codes to program a One For All remote to Haier TV.

How to Program Universal Remote to Haier TV [Manual Method]

[1] Using the physical Power button, turn on your Haier TV.

[2] Press the TV button on the universal remote.

[3] Then, press and hold the SETUP button until the LED light begins to flash.

[4] Enter the respective remote code.

[5] After entering the code, aim the remote at the TV and press the Power button and keep hold of it.

[6] If it turns off the TV, you have successfully programmed the remote.

How to Program Universal Remote to Haier TV [Code Search]

[1] Press the physical Power button to turn on your TV.

[2] Then, press the SETUP button and enter the code 9-9-1 in sequence when you see the LED light starts blinking.

[3] Press the Channel Up and Power buttons and hold them simultaneously until the device is turned off.

[4] If your TV turn off, it indicates that the remote programming is successful.

How to Program Universal Remote to Haier TV Without Code

[1] Turn on your Haier TV using the physical Power button and press the TV button.

[2] Release the button if the LED light starts flashing,

[3] Point the remote to the TV and press the CH+ and CH- buttons continuously until you see on/off signals on the remote. 

[4] Next, press the Up and Down buttons at a time until the TV is turned off.

[5] Once turned off, press the Power button on the remote to check if it turns on the TV. If it turns on, press the Channel keys to test its functions.

[6] Finally, press the Device button to save the code.

Start using the universal remote by pressing the function keys of your wish.

FAQ