Sometimes, the Element TV remote may stop working due to some reasons. So, keeping a universal remote for Element TV is a helpful hand. With a universal remote, you can control Smart TVs, streaming devices, cable TV boxes, DVDs, VCRs, and more. However, you need to program a universal remote before you start using it. Hence, you can either use remote codes or use the code search method to program a universal remote to your Element TV.
How to Program Universal Remote to Element TV Without Codes
[1] Turn on your Element TV by pressing the Power button on the TV panel.
[2] Press the TV button on the universal remote and hold it for 3 seconds. Release the button if the LED light starts flashing.
[3] Next, press the CH+ and CH- buttons continuously until you see on/off signals on the remote.
[4] Following that, press the Up and Down buttons at a time until the TV is turned off.
[5] Press the Power button to verify the code and see if it turns on the TV.
[6] If it works, press the Channel or Volume keys to test its functions.
[7] Finally, press the Device button to save the code on the remote.
How to Program Universal Remote to Element TV Using Manual Method
[1] Turn on your TV using the Power button.
[2] Press and hold the SETUP button on the remote until the red LED light appears.
[3] Release the SETUP button once the red LED stays idle.
[4] Press the Device button. You will see the red LED light blink once and stay idle.
[5] Enter the relevant remote code in the number pad.
[6] Now, point the remote to the TV, press any keys, and check the function.
If the remote works fine, the universal remote is paired with your Element TV successfully. If not, repeat the same steps with a different remote.
Note: You can check our comprehensive guide on Element TV universal remote codes to find the exact code.
How to Program Universal Remote to Element TV Using Code Search
[1] Press the physical Power button to turn on your Element TV.
[2] Press the SETUP button and keep hold of it for a few seconds.
[3] If the LED light starts blinking, enter the code 9-9-1 in sequence.
[4] Press the Channel Up and Power buttons and hold them simultaneously until the device is turned off.
[5] If your TV turns off, it indicates that the remote programming is successful.
How to Program DirecTV Remote to Element TV
If you keep a DirecTV universal remote, you can use it to control your Element TV. Follow these instructions to program a DirecTV remote to Element TV without codes.
[1] Turn on your TV and point the DirecTV remote towards the Element TV.
[2] Press and hold the Select and Mute buttons together.
[3] Release the buttons when you see the green LED lights blinking three times.
[4] Then, enter the remote ode. Each time when you enter the number the LED light will blink.
[5] When the LED green light blinks twice, it means that your remote is programmed successfully.
Test the remote by pressing the Power button. If it does not work repeat the same step with a different remote code.
How to Program Xfinity Remote to Element TV
Similarly, you can control Element TV using an Xfinity cable box remote. Try the below steps for programming an Xfinity remote to Element TV.
[1] Turn on your Element TV and select Xfinity TV Box as the TV input.
[2] Press the SETUP button until the LED light on the remote changes from red to green.
[3] Then, press the Xfinity button until the LED on the remote blinks green.
[4] Enter the 3-digit code that appears on the TV screen.
[5] Upon pairing, you will see the message on the screen stating the Remote Pairing Complete.
[6] Now, you can press the buttons on the remote to test the function.
How to Program Element TV Remote to DVD Player
You can also control the DVD player using a universal remote for Element TV once you program it with these steps.
[1] Turn on your Element TV and DVD player.
[2] Press and hold the SETUP button on the remote until the red LED light appears and release it once the red LED stays idle.
[3] Then, press the DVD button. You will see the red LED light blink once and stay idle.
[5] Enter the relevant remote code in the number pad.
[6] Now, point the remote to the TV, press any keys, and check the function.
FAQ
Yes. You can use third-party universal remote control apps to control the Element TV since there is no official Element TV remote app.
The 4-digit codes for Element TV are 1718, 2183, 4217, 1507, 2256, 1025, 1918, 5411, 1104, 1228, 0081, 4401, 5353, 1756, 4111, 0281, 2401, 1065,1598, 2801, 5471, 0571, 3559, 1398, 1437, 1407, 1204, 1444, 0178, 1886, 1687, 0911, 2049, 6021, 0020, 3183.
The codes that you can use to program a GE universal remote to Element TV are 5421, 1091, 1651, 5361, 5341, 2401, 5471, 5831, 5841, 6021
Unfortunately, there is no official Element TV remote app. However, if you have an Element Roku TV, you can download and use The Roku App as a virtual remote. If you have an Element TV that runs on Fire OS, you can use the Amazon Fire TV app as a remote control.
