Key Notes
- To Program BlueCurve/Shaw Stream TV Remote: Follow the on-screen instruction to pair and program the remote to the TV.
- To Program Gateway Remote to TV: Find the TV’s code → Tap and hold the Menu and OK buttons → type the code → Power button blinks → press the Power button.
- To Program Champ/Champion TV Remote: Hold down the SETUP button → press the TV Power button → Tap and hold the OK button → Release the OK button.
- To Program Atlas Remote to TV: Press the mode key → long-press the SETUP button → Input the code → press the Power button.
- To Program Transport TV Remote: Locate the code → long press the SET button → enter the code → press the Power button.
The Shaw remote is used to control and manage your TV, PVR, DVD, Blu-Ray, Audio system, and many more. You should program your Shaw remote to control your TV. However, there are different models of Shaw remote, and the programming steps vary depending on the type of TV box. So, it is indeed vital to find your remote model to program it to the TV.
How to Program BlueCurve/Shaw Stream TV Remote
To program your Shaw or BlueCurve TV remotes, just follow the on-screen instruction that appears on the screen. Simply pair your remote with a TV and start controlling or managing it.
How to Program Gateway Remote to TV
[1]. The first step is to find your TV’s code by using the Gateway remote user’s guide.
[2]. Place your Gateway remote in front of your TV.
[3]. Next, tap and hold the Menu and OK buttons at the same time until the Power button on your remote blinks twice.
[4]. Release those buttons and type the code of your TV that you have found.
[5]. After entering the code, the Power button should blink again.
[6]. Finally, press the Power button. If the TV is turned off, the programming process is successful. If not, you need to follow the same procedure.
Important Note: There are three easy ways in which you can program One For All Remote to TV.
How to Program Champ/Champion TV Remote
[1]. Initially, hold down the SETUP button till the LED flashes two times, and then release the button.
[2]. After that, press the TV Power button.
[3]. Tap and hold the OK button on the remote.
[4]. Release the OK button when the TV powers off.
Note: Likewise, users with Bell Satellite TV can easily program the Bell remote to TV without codes.
How to Program Atlas Remote to TV
[1]. On the top of your Atlas TV remote, press the mode key.
[2]. Then, long press the SETUP button on your remote until the mode key blinks.
[3]. Input the code of your TV.
[4]. Finally, press the Power button to check if the TV is turning off. Or else you need to repeat the process.
How to Program Transport TV Remote
[1]. Turn on your TV and locate the code for your TV.
[2]. On your Transport TV remote, long press the SET button till you see the Red light flash twice.
[3]. Now, enter the code of your TV, and again the red light flashes twice.
[4]. After that, press the Power button. If the TV shuts down, then the programs for your remote are successful. Otherwise, you need to repeat the same steps.
Frequently Asked Questions
When you can’t pair the Shaw remote, you should check if the cable box is plugged properly, try replacing the batteries, power cycle the cable box, or unplug the power. ,
Press and hold the Enter and Mute buttons at once till the mode button flashes. Then enter the remote code and press the Enter button. Finally, press the Guide button to confirm the process.
